PurgeNet™ Dew Point Purging Gas Moisture Sensor™

  • Product
  • Overview
  • Key Features
  • Specification
  • Reviews
  • FAQ
  • Ordering
  • Downloads
  • Gallery

Eliminate Porosity in the Weld

Measurement of the Dew Point for Critical welds has never been easier than with the revolutionary HFT® PurgeNet™ Dew Point Purging Gas Moisture Sensor™.

Designed to integrate with any of our high spec PurgEye® Weld Purge Monitors® reading down to 1 ppm (accurate to 10 ppm), this device now means that Companies making critical joints, no longer need to purchase a separate, expensive, Dew Point Meter.

Measurement of the Dew Point for Critical welds has never been easier than with the revolutionary HFT Dew Point Monitor

 

Click here to send us a message

Contact us - See our Worldwide Offices

Read More

Connect Direct to a Weld Purge Monitor®

Measurement of the Dew Point for Critical welds has never been easier than with the revolutionary HFT Dew Point Monitor

During Weld Purging, while the value of Oxygen present, is being measured by a Weld Purge Monitor, welding and QA personnel, may frequently may need to measure the Dew Point Moisture to prevent the gases including oxygen, hydrogen and nitrogen from being absorbed into a weld joint.

The HFT® PurgeNet™ Dew Point Purging Gas Moisture Sensor Accessory™, is that value where condensation begins and any water in the welding environment, will condense on the material being welded, which can affect the weld properties significantly.

Huntingdon Fusion Techniques Ltd has a Dew Point Sensor in its product line that can be used in conjunction with our range of 1 ppm Weld Purge Monitors®.

It is not necessary to purchase a separate, expensive Dew Point Meter, as NEW PurgeNet™ Dew Point Purging Gas Moisture Sensor™ can simply be connected to and integrated with the Weld Purge Monitor® via the PurgeNet™ lead.

Available for use with the following Weld Purge Monitors® (1 ppm with accuracy to 10 ppm):

  • PurgEye® 200
  • PurgEye® 500 Desk
  • PurgEye® 600
  • PurgEye® 1000 Remote
  • PurgEye® 1500 Site

 

Contact us - See our Worldwide Offices

Read More

Accurate Dew Point Measurement

Argweld PurgEye Weld Purge Monitor HFT Dew Point Sensor Purging Gas Moisture

The HFT PurgeNet™ Dew Point Purging Gas Moisture Sensor Accessory™ is designed to fit any of our Weld Purge Monitors® that read down to 1 ppm (accuracy to 10 ppm). 

Connection is made via the PurgeNet™ lead that is supplied as standard with these models.

Power Requirement

1 watt, powered from PurgeNet™ lead.

Output

Dew point data will be output to supporting Weld Purge Monitor® for display and Data Logging via PurgeLog™.

Data is displayed on the OLED screen of the PurgEye® Weld Purge Monitor® in split format so both oxygen (O2) and moisture (H2O) content are shown as ppm value.

 

Contact us - See our Worldwide Offices

Read More

Technical Data and Specification

Argweld PurgEye Weld Purge Monitor HFT Dew Point Sensor Purging Gas Moisture

Choosing the correct Dew Point measurement equipment for your application is essential for perfect operation.

Our Dew Point Purging Gas Moisture Sensor™ can offer a reliable and a stable monitoring of the dew point with easy set up and quick response time.

This NEW innovative Dew Point Purging Gas Moisture Sensor™ has been manufactured purely for welding and offers you:

  • Accurate measurement
  • Very fast response time

Our Dew Point Purging Gas Moisture Sensor™ is suitable for the following types of gases:

  • Argon (Ar)
  • Oxygen (O2)
  • Nitrogen (N2)
  • Hydrogen (H2)
  • Carbon Dioxide (CO2)

 

Contact us - See our Worldwide Offices

Read More

PurgeNet™ Dew Point Purging Gas Moisture Sensor™

See what our Users have to say......

01W Dew Point Purge Gas Moisture SensorThe kit worked great, thanks again for letting us trial it.

The Dew Point Purging Gas Moisture Sensor™ was dropped off with our goods out team yesterday and should be back with you today and the PurgEye unit will be sent back.

Thursday after I’ve done a little more playing. I’ll be looking to place an order for both next week, could you please provide a quote?

Thanks for the brilliant service you have provided so far.


Rolls Royce


Please contact us by email for actual user names and user lists which can be obtained separately.


Contact us - See our Worldwide Offices

 

Read More

Frequently Asked Questions

Argweld PurgEye 1000 Remote Weld Purge Monitor Oxygen Analyzer Welding Gas Analyser Handy Rechargeable Battery Operated

1.0 What is ‘Dew”?
Dew is expressed as drops of liquid water that condense from the atmosphere and onto any solid surface like metal.

2.0 What is ‘the Dew Point’?
The dew point is the temperature in ºC or ºF at which air is saturated with water vapour (also referred to as humidity). Below the dew point, water will begin to condense on solid surfaces in the welding environment.

3.0 How does water moisture affect the quality of the weld joint?
Under arc conditions, water is broken down into hydrogen and oxygen in atomic form which, when present in weld metal, cause porosity and are known to create cracking in the weld joint.

4.0 Why should I use a Dew Point Purging Gas Moisture Sensor™?
Using the PurgeNet™ Dew Point Purging Gas Moisture Sensor™ while welding is the easiest method for indicating when water will condense on solid surfaces in the welding zone. Water can form as moisture on metal surfaces while welding and it is important to be able to measure ‘Dew Point” while welding lengthy critical joints as conditions can change during the welding process.

5.0 How does the Dew Point Purging Gas Moisture Sensor™ give readings?
The PurgEye® Dew Point Sensor accessory has been designed to integrate with most of the Argweld® Weld Purge Monitors® via the PurgeNet™ lead that is supplied with them, thereby giving values and water present on the same screen. In this way, the user is not forced into the purchase of an expensive, separate Dew Point Monitor that will give its reading elsewhere.

6.0 Which Weld Purge Monitors® are compatible with the Dew Point Purging Gas Moisture Sensor™?
The PurgeNet™ Dew Point Purging Gas Moisture Sensor™ is compatible with the PurgEye® 200, 500 Desk, 600, 1000 Remote and 1500 Site.

 

Contact us - See our Worldwide Offices

Read More

Shipping Information, Weights and Dimensions

Argweld PurgEye Weld Purge Monitor HFT Dew Point Sensor Purging Gas Moisture

 

Customs Tariff 

European Customs Tariff: 9026 1089
International Customs Tariff: 9026 80 6000
United States Customs Tariff:               9026 80 6000
Canada Customs Tariff: 9026 80 6000

 

 

Product Codes and Sizes 

Shipping Dimensions 290 x 265 x 120 mm
Nett weight 0.870 kg
Volumetric weight with case        1.42 kg

 

 

Argweld® PurgeNet™ Dew Point Purging Gas Moisture Sensor Accessory™

PART Nº PRODUCT DESCRIPTION

DPS1000

HFT® PurgeNet™ Dew Point Purging Gas Moisture Sensor Accessory™

To be used in conjunction with the following high spec Weld Purge Monitors reading down to 1 ppm (accurate to 10 ppm):

  • PurgEye® 200
  • PurgEye® 500 Desk
  • PurgEye® 600
  • PurgEye® 1000 Remote
  • PurgEye® 1500 Site

For linking via PurgeNet™ Smart Cable that is supplied as standard with all models. 

 

The PurgEye® Auxiliaries for the Argweld® Family Range of PurgEye® Weld Purge Monitors® (10 ppm - excluding Nano) are held in stock and available for immediate delivery. 

PART Nº PRODUCT DESCRIPTION
DPS1000

PNA-01

PNA-02

PNA-021

PNA-022

ATMS002

PNA-05
PurgeNet Dew Point Purging Gas Moisture Sensor

PurgeNet
Weld Machine Interface (for PPM Readings to Welding Power Sources, such as Orbital Welder)

PurgeAlarmVisual Alarm Indicator, red light only

PurgeAlarmVisual Alarm Indicator, green light (fitted on top of red light)

Bracket for PurgeAlarm

PurgeLog™ Data Logging Software for Quality Control

PurgeNet™ Smart Cable with multi-plug options, charging, alarms, software


PurgeAlarm
™ (NOTE: for use with PurgeNet™)

Contact us - See our Worldwide Offices

Read More

Items available as 'Downloads'

 

Leaflets and general sales material are available to everyone visiting our website.  

Restricted access items are shown at the end of this Download section.

 

PurgeNet™ Dew Point Purging Gas Moisture Sensor™ A4 Leaflet

PurgeNet™ Dew Point Purging Gas Moisture Sensor™ Information Flyer

PurgeNet™ Dew Point Purging Gas Moisture Sensor™ FAQ

 

PurgeNet™ Smart Cable A4 Leaflet

PurgeNet™ Smart Cable Information Flyer

PurgeNet™ Smart Cable  FAQ

 

PurgeAlarm™ Visual Alarm Indicator A4 Leaflet

PurgeAlarm™ Visual Alarm Indicator Information Flyer

PurgeAlarm™ Visual Alarm Indicator Information FAQ

 

PurgeLog™ Data Logging Software Information Flyer

PurgeLog™ Data Logging Software FAQ

 

PurgeNet™ Automatic Machine Interface A4 Leaflet

PurgeNet™ Automatic Machine Interface Information Flyer

PurgeNet™ Automatic Machine Interface Information FAQ

  

Argweld® PurgEye® Weld Purge Monitors® Filters

 

Return on Investment (ROI) Weld Purge Monitors and Weld Purging Systems

Understanding Atmosphere in PPM

Parts Per Million vs Percentage of Oxygen

How to convert Percent to PPM

Argweld® PurgEye® Weld Purge Monitors® Poster

Argweld® PurgEye® Weld Purge Monitors® Technical Tips Training Posters

Argweld® PurgEye® Weld Purge Monitors® Family Range Information Flyer

Technical Comparison Table of all Argweld® PurgEye® Weld Purge Monitors®

 

 

Special Note: The items below are restricted and only available in our Secure Login section. This is mainly for the protection of our Exclusive Distributor network.
Should you wish to receive an item mentioned below which is not active as a 'download' link on this page, please contact us or your nearest Distributor.

Argweld® PurgeNet® Dew Point Purging Gas Moisture Sensor™ User Instructions Technical Manual
Argweld® PurgeNet® Dew Point Purging Gas Moisture Sensor™Technical Notes
Argweld® PurgeNet® Dew Point Purging Gas Moisture Sensor™Weld Purge Monitor® User List Customer Service
Argweld® PurgeNet® Dew Point Purging Gas Moisture Sensor™ Weld Purge Monitor® Price List 

 

Contact us - See our Worldwide Offices

 

Read More

PurgeNet® Automatic Machine Interface for PPM Readings to Welding Power Sources

  • Product
  • Overview
  • Key Features
  • Specification
  • FAQ
  • Ordering
  • Downloads
  • Gallery

Take Control of Welding Power Sources

The PurgeNet™ Machine Interface Lead is used for communicating the current oxygen reading from your PurgEye® Weld Purge Monitor® to another piece of equipment, such as a Welding Power Source.

All of the HFT® PurgEye® Weld Purge Monitors® reading down to 10 ppm (with the exception of the PurgEye® Nano) can control the start/stop function on a Welding Power Source. This is facilitated using the PurgeNet™ Machine Interface Lead.

For critical welds this is an essential feature to ensure consistent weld quality every time.

PurgeNet Machine Interface Welding Power Sources PPM Readings Weld Purge Monitor

 

Contact us - See our Worldwide Offices

Read More

Giving You Full Control of PPM Readings to your Power Source

PurgeNet Machine Interface Welding Power Sources PPM Readings Weld Purge Monitor

PurgeNet™ Machine Interface allows a minimum PPM level to be set on the Weld Purge Monitor® by the user, in accordance with the welding parameter.

If during the weld, the oxygen content in the purge gas falls to this, the welding power source automatically switches off, pausing the welding process until the PPM level has risen again.

For critical welds this is an essential feature to ensure consistent weld quality every time.

The lead connects to the port on the Weld Purge® Monitor®, with a connection for an optional PurgeAlarm™ Visual Alarm Indicator™. Charging for the Weld Purge Monitor® can also be facilitated from the lead.

Oxygen readings are communicated through industry standard 4020A current loop and relay signals.

The interface also includes a power supply to charge / power your PurgEye® from a standard 12-24V supply found in most industrial machines.

 

Contact us - See our Worldwide Offices

Read More

Communicate with all your Machines

PurgeNet Machine Interface Welding Power Sources PPM Readings Weld Purge Monitor

Using the PurgeNet™ Machine Interface Lead gives welders full control of their welding power sources or other equipment like no other

Communicate easily with the current oxygen reading from your PurgEye® Weld Purge Monitor® to another piece of equipment, such as a Welding Power Source.

A critical and essential feature to ensure weld consistency.

The lead connects to the port on the Weld Purge® Monitor®, with a connection for an optional PurgeAlarm™ Visual Alarm Indicator™.

Charging for the Weld Purge Monitor® can also be facilitated from the lead.

Optional items:

  • PurgeNet™ Smart Cable.
  • PurgeNet™ Visual Alarm Indicator™.
  • PurgeLog™ Data Logging Software.  PurgeNet™ Smart Cable also works
    with software PurgeLog™ to easily transfer weld purge data for
    Quality Control purposes.

 

PurgeNet Machine Interface Welding Power Sources PPM Readings Weld Purge Monitor

 

Contact us - See our Worldwide Offices

Read More

Technical Data and Specification

PurgeNet Machine Interface Welding Power Sources PPM Readings Weld Purge MonitorThe PurgeNet™ Machine Interface Lead connects to the port on the Weld Purge Monitor®. Charging can also be facilitated from this lead as can the use of other PurgeNet™ accessories.

Oxygen readings are communicated through industry standard 4020A current loop and relay signals. The interface also includes a power supply to charge / power your PurgEye® Weld Purge Monitors from a standard 12-24V supply found in most industrial machines.

OUTPUT

For PurgEye® Weld Purge Monitors® with 10 to 1000 ppm range, the current output from the interface is linear, with 4mA representing 0 ppm and 20mA representing 1,000 ppm, with a resolution better than 1 ppm.

For the PurgEye® 600 Touch, with a measuring range of 10 to 250, 000 ppm, the current output is split into two linear output ranges, as follow:

PurgEye® 600 Touch

0 – 1,000 ppm
1,000 – 250,000 ppm

Current Output

 4mA - 12mA
12mA - 20mA

Resolution

< 1 ppm
 ~ 100 ppm

STATUS LIGHT

Slow flash
PNA-01 is correctly powered and receiving valid data from your PurgEye®.

On
PNA-01 is correctly powered but no data is being received from your PurgEye®.

Off
The PNA-01 is not powered, ensure the current loop and supply connections are correctly configured. See ‘Connections’ below.

CONNECTIONS

The basic connections required to get the module working are shown below (the power supply is optional for battery powered models). The status input can be used to control the sample pump in your PurgEye®, use a volt-free contact to connect the ‘IN’ terminal to the ‘0 VDC’ terminal to activate the input.

PurgEye® Weld Purge Monitors®

LIN (PurgeNet™ Data)
NEG (PurgeNet™ Ground)
POS (PurgeNet™ Supply)
IN (Status)
0 VDC
+12 - 24 VDC

12-24 V
Power supply

For voltage output using the 4-20mA output, connect as below:

Relay 1
Relay 1
Relay 2
Relay 2
4 - 20mA
4 - 20mA

12-24 V
Power supply

100 ohm Resistor

The 10 ppm Weld Purge Monitors (excluding the Nano) PurgEye® 200, PurgEye® 500, PurgEye® 600, PurgEye® 1000 and PurgEye® 1500 Site all now comes complete with PurgeNet™ Smart Cable.

Please see individual PurgEye® Weld Purge Monitors® for further specification.

Auxiliary items:

  • PurgeNet™ Smart Cable for charging with multi-plug options

  • PurgeAlarm™ Traffic Light Visual warning accessory

  • PurgeLog™ Data Logging Software for Quality Control

 

Compare all Weld Purge Monitors

Contact us - See our Worldwide Offices

Read More

Frequently Asked Questions

Argweld PurgEye 1000 Remote Weld Purge Monitor Oxygen Analyzer Welding Gas Analyser Handy Rechargeable Battery Operated

1.0 What is the PurgeNet™ Machine Interface?
PurgeNet™ Machine interface is used for communicating the current oxygen readings from your PurgEye® Weld Purge Monitor® to another piece of equipment, such as a Welding Power Source.

2.0 Which Weld Purge Monitors® are compatible with the PurgeNet™ Machine Interface?
The PurgeNet™ Machine Interface is compatible with the PurgEye® 200, 500 Desk, 600, 1000 Remote and 1500 Site.

3.0 How does the PurgeNet™ Machine Interface connect?
Essentially, the PurgeNet™ Machine Interface is a lead that connects to the port on the Weld Purge Monitor®. Charging can also be facilitated from this lead as can the use of other PurgeNet™ accessories.

4.0 How are oxygen readings communicated?
A minimum PPM level is set on the Weld Purge Monitor® by the user, in accordance with the welding parameter, and if during the weld, the oxygen content in the purge gas falls to this, the welding power source automatically switches off, pausing the welding process until the PPM level has risen again. Oxygen readings are communicated through industry standard 4020A current loop and relay signals.

 

Contact us - See our Worldwide Offices

Read More

Shipping Information, Weights and Dimensions

PurgEye PurgeLog PurgeAlarm PurgeNet Weld Purge Monitors Gas Analysers Oxygen Measuring Instruments

Customs Tariff

 

European Customs Tariff: 9026 1089
International Customs Tariff: 9026 80 6000
United States Customs Tariff:               9026 80 6000
Canada Customs Tariff: 9026 80 6000

 

 

Product Codes and Sizes

 

Shipping Dimensions To Follow Shortly - mm
Nett weight 0.2 kg
Volumetric weight with case        0.3 kg

 
 
 

The Argweld® PurgeNet™ Weld Machine Interface Lead for the Family range of PurgEye® Weld Purge Monitors® (10 ppm - excluding Nano) are held in stock and available for immediate delivery. 

PNA-01

PNA-02

PNA-021

PNA-022

ATMS002

PNA-05
PurgeNetWeld Machine Interface (for PPM Readings to Welding Power Sources, such as Orbital Welder)

PurgeAlarmVisual Alarm Indicator, red light only

PurgeAlarmVisual Alarm Indicator, green light (fitted on top of red light)

Bracket for PurgeAlarm

PurgeLog™ Data Logging Software for Quality Control

PurgeNet™ Smart Cable with multi-plug options, charging, alarms, software


PurgeAlarm™ (NOTE: for use with PurgeNet™)

 

Contact us - See our Worldwide Offices

Read More

Items available as 'Downloads'

 

Leaflets and general sales material are available to everyone visiting our website.  

Restricted access items are shown at the end of this Download section.

PurgeNet™ Automatic Machine Interface A4 Leaflet

PurgeNet™ Automatic Machine Interface Information Flyer

PurgeNet™ Automatic Machine Interface Information FAQ

 

PurgeNet™ Dew Point Purging Gas Moisture Sensor™ A4 Leaflet

PurgeNet™ Dew Point Purging Gas Moisture Sensor™ Information Flyer

PurgeNet™ Dew Point Purging Gas Moisture Sensor™ FAQ

 

PurgeNet™ Smart Cable A4 Leaflet

PurgeNet™ Smart Cable Information Flyer

PurgeNet™ Smart Cable FAQ

 

PurgeAlarm™ Visual Alarm Indicator A4 Leaflet

PurgeAlarm™ Visual Alarm Indicator Information Flyer

PurgeAlarm™ Visual Alarm Indicator Information FAQ

 

PurgeLog™ Data Logging Software Information Flyer

PurgeLog™ Data Logging Software FAQ

 

Argweld® PurgEye® Weld Purge Monitors® Filters

 

Return on Investment (ROI) Weld Purge Monitors and Weld Purging Systems

Understanding Atmosphere in PPM

Parts Per Million vs Percentage of Oxygen

How to convert Percent to PPM

Argweld® PurgEye® Weld Purge Monitors® Poster

Argweld® PurgEye® Weld Purge Monitors® Technical Tips Training Posters

Argweld® PurgEye® Weld Purge Monitors® Family Range Information Flyer

Technical Comparison Table of all Argweld® PurgEye® Weld Purge Monitors®

 

 

Special Note: The items below are restricted and only available in our Secure Login section. This is mainly for the protection of our Exclusive Distributor network.
Should you wish to receive an item mentioned below which is not active as a 'download' link on this page, please contact us or your nearest Distributor.

PurgeNet™ Machine Interface User Instructions Technical Manual
PurgeNet™ Machine InterfaceTechnical Notes
PurgeNet™ Machine Interface User List Customer Service
PurgeNet™ Machine Interface Price List 

 

Contact us - See our Worldwide Offices

 

Read More

PurgeLog™ Data Logging Software

  • Product
  • Overview
  • Key Features
  • Specification
  • FAQ
  • Ordering
  • Downloads
  • Gallery
  • Videos

PurgeLog™ Data Logging Software, 'Plug and Play'

Data logging capability is now automatically included 'as standard' with any of the Argweld® PurgEye® Weld Purge Monitor range which measure down to 1 ppm (accurate to 10 ppm).   

Transfer of Quality Control documentation and Weld Certification has never been easier with our unique Data Logging Software called PurgeLog™.

 

Argweld PurgEye PurgeNet PurgeLog PurgeAlarm Weld Purge Monitors Oxygen Analysers

 

Contact us - See our Worldwide Offices

Read More

Data Logging with PurgEye® Weld Purge Monitors®

PurgeLog Data Logging Software Weld Purge Monitors PurgEye MarkV Mark5 Oxygen Analysers

PurgeLog™ software is simply a 'plug and play' install on your PC. 

Software is supplied on USB data stick for easy installation to Windows based PC.

Purge data can be transferred to PC using the PurgeNet™ Smart Lead and has the option of being imported into a spreadsheet for further manipulation.  

Available for use with the following high spec Weld Purge Monitors:

  • PurgEye® 200
  • PurgEye® 500 Desk
  • PurgEye® 600
  • PurgEye® 1000 Remote
  • PurgEye® 1500 Site

This family range of PurgEye Weld Purge Monitors all read down to 1 ppm (accurate to 10 ppm).

Manual mode within the software allows data logging and Quality Control even from a third party accessory.

 

 

Contact us - See our Worldwide Offices

Read More

Easy Download of Purging Data

Argweld PurgEye PurgeNet PurgeLog PurgeAlarm Weld Purge Monitors Oxygen Analysers

PurgeLog™ enables data to be easily downloaded and imported into a spreadsheet on a PC.

Use the PurgeNet™ Smart Cable for easy transfer.

Software preferences for user control.

Both PurgeLog™ Data Logging Software and PurgeNet™ Smart Lead are included with all PurgEye® Weld Purge Monitors with accuracy to 10 ppm. 

 

 

 

 

 

 

Contact us - See our Worldwide Offices

Read More

Technical Data and Specification

PurgeLog Data Logging Software Weld Purge Monitors PurgEye MarkV Mark5 Oxygen Analysers

Setting preferences for PurgeLog™ Data Logging is straight forward as with all PC software.

Quality Control from a third party accessory is enabled through the manual mode.

Installation is simply 'Plug and Play'.

Software is supplied as a standard with all PurgEye® high spec Weld Purge Monitors.

Option for using PurgeNet™ Smart Cable gives easy access to data in a spreadsheet format.

 

 

 

 

 

Contact us - See our Worldwide Offices

Read More

Frequently Asked Questions

Argweld PurgEye 1000 Remote Weld Purge Monitor Oxygen Analyzer Welding Gas Analyser Handy Rechargeable Battery Operated

1.0 What is PurgeLog™?
PurgeLog™ is a Data Logging Software that is automatically included as standard with any of the Argweld® PurgEye® Weld Purge Monitors® which measure down to 1 ppm (accurate to 10 ppm).

2.0 How is PurgeLog™ Data Logging Software supplied?
PurgeLog™ Data Logging Software is supplied on a USB data stick for easy installation onto a Windows based PC. PurgeLog™ software is simply a ‘plug and play’ install onto your PC.

3.0 How does PurgeLog™ Data Logging Software work?
PurgeLog™ Data Logging Software transfers purge data onto a PC using the PurgeNet™ Smart Lead and has the option of being imported into a spreadsheet for further manipulation.

4.0 Which Weld Purge Monitors® include PurgeLog™ Data Logging Software?
Both PurgeLog™ Data Logging Software and PurgeNet™ Smart Lead are included with all 1 ppm PurgEye® Weld Purge Monitors® (accurate to 10 ppm). This includes the PurgEye® 200, PurgEye® 500 Desk, PurgEye® 600, PurgEye® 1000 Remote and PurgEye® 1500 Site.

 

Contact us - See our Worldwide Offices

Read More

Shipping Information, Weights and Dimensions

Dew Point Sensor

 

Customs Tariff 

European Customs Tariff: 9026 1089
International Customs Tariff: 9026 80 6000
United States Customs Tariff:               9026 80 6000
Canada Customs Tariff: 9026 80 6000

 

 

Product Codes and Sizes 

Shipping Dimensions Thumbdrive
Nett weight 0.01 kg
Volumetric weight with case        0.01 kg

 

 

HFT® PurgeLog™ Data Logging Software™

PART Nº PRODUCT DESCRIPTION

PurgeLog™

HFT® PurgeLog™ Data Logging Software

Both PurgeLog™ software and for linking via PurgeNet™ Smart Lead are included as standard with the following
high spec Weld Purge Monitors 1 ppm (accurate to 10 ppm):

  • PurgEye® 200
  • PurgEye® 500 Desk
  • PurgEye® 600
  • PurgEye® 1000 Remote
  • PurgEye® 1500 Site

 

The PurgEye® Auxiliaries for the Argweld® Family Range of PurgEye® Weld Purge Monitors® (10 ppm - excluding Nano) are held in stock and available for immediate delivery. 

PART Nº PRODUCT DESCRIPTION
DPS1000

PNA-01

PNA-02

PNA-021

PNA-022

ATMS002

PNA-05
PurgeNet Dew Point Purging Gas Moisture Sensor

PurgeNet
Weld Machine Interface (for PPM Readings to Welding Power Sources, such as Orbital Welder)

PurgeAlarmVisual Alarm Indicator, red light only

PurgeAlarmVisual Alarm Indicator, green light (fitted on top of red light)

Bracket for PurgeAlarm

PurgeLog™ Data Logging Software for Quality Control

PurgeNet™ Smart Cable with multi-plug options, charging, alarms, software


PurgeAlarm
™ (NOTE: for use with PurgeNet™)

Contact us - See our Worldwide Offices

Read More

Items available as 'Downloads'

 

Leaflets and general sales material are available to everyone visiting our website.  

Restricted access items are shown at the end of this Download section.

PurgeLog™ Data Logging Software Information Flyer

PurgeLog™ Data Logging Software FAQ

 

PurgeNet™ Dew Point Purging Gas Moisture Sensor™ A4 Leaflet

PurgeNet™ Dew Point Purging Gas Moisture Sensor™ Information Flyer

PurgeNet™ Dew Point Purging Gas Moisture Sensor™ FAQ

 

PurgeNet™ Smart Cable A4 Leaflet

PurgeNet™ Smart Cable Information Flyer

PurgeNet™ Smart Cable FAQ

 

PurgeAlarm™ Visual Alarm Indicator A4 Leaflet

PurgeAlarm™ Visual Alarm Indicator Information Flyer

PurgeAlarm™ Visual Alarm Indicator Information FAQ

 

PurgeNet™ Automatic Machine Interface A4 Leaflet

PurgeNet™ Automatic Machine Interface Information Flyer

PurgeNet™ Automatic Machine Interface Information FAQ

  

Argweld® PurgEye® Weld Purge Monitors® Filters

 

Return on Investment (ROI) Weld Purge Monitors and Weld Purging Systems

Understanding Atmosphere in PPM

Parts Per Million vs Percentage of Oxygen

How to convert Percent to PPM

Argweld® PurgEye® Weld Purge Monitors® Poster

Argweld® PurgEye® Weld Purge Monitors® Technical Tips Training Posters

Argweld® PurgEye® Weld Purge Monitors® Family Range Information Flyer

Technical Comparison Table of all Argweld® PurgEye® Weld Purge Monitors®

 

 

Special Note: The items below are restricted and only available in our Secure Login section. This is mainly for the protection of our Exclusive Distributor network.
Should you wish to receive an item mentioned below which is not active as a 'download' link on this page, please contact us or your nearest Distributor.

Argweld® PurgeLog™ Data Logging Software User Instructions Technical Manual
Argweld® PurgeLog™ Data Logging SoftwareTechnical Notes
Argweld® PurgeLog™ Data Logging SoftwareWeld Purge Monitor® User List Customer Service
Argweld® PurgeLog™ Data Logging Software Weld Purge Monitor® Price List 

 

Contact us - See our Worldwide Offices

 

Read More

PurgeAlarm™ Visual Alarm Indicator

  • Product
  • Overview
  • Key Features
  • Specification
  • FAQ
  • Ordering
  • Downloads
  • Gallery

An Easy Traffic Light Indicator for your Welding

PurgeAlarm™ Visual Alarm Indicator is an IP66 rated industrial traffic light style column to convey the alarm status of your PurgEye® Weld Purge Monitor®.

Can be fitted with a single red light (stop) or green (go) and red light combinations.  

Argweld PurgEye PurgeAlarm PurgeNet PurgeLog Weld Purge Monitors Oxygen Gas Instruments

NEW PurgeAlarm™ an auxiliary for PurgEye® Weld Purge Monitors.

Our Weld Purge Monitors® have been specifically designed for excellent weld purging conditions creating the best oxide-free zero color welds

Weld Purge Monitor ® invented by HFT ®, who own all Rights and Registered Trademarks in USA and Europe.  Designed and manufactured in the UK, for the highest level of quality. 

Technical Comparison of all Weld Purge Monitors® 

Use this chart to find which model suits your requirements and to make an informed choice.

Read More...

 

Return on Investment (ROI)

All Argweld® Pipe Weld Purging Systems and all PurgEye® Weld Purge Monitors® provide instant Return on Investment.

Read More...

 

Contact us - See our Worldwide Offices

Read More

Feel Safe with Alarm Control

Argweld PurgeEye PurgeLog PurgeNet PurgeAlarm Weld Purge Monitors Gas Analyzers Oxygen Instruments

The PurgeAlarm Visual Alarm Indicator has a light column which can be mounted through a 23 mm diameter hole with a maximum material thickness of 15 mm.

As standard, the PurgeAlarm™ includes a single red indicator with 360 degree visibility.

The red indicator will be illuminated when the PurgEye® alarm is enabled and is reading a value greater than the alarm threshold set by the user.

PurgEye® is the Argweld® Family Series of Weld Purge Monitors®, Huntingdon Fusion Techniques HFT® invented the World's 1st true Purge Monitor® for weld purging and has become the standard instrument for industry of today.

 

 

Contact us - See our Worldwide Offices

Read More

Easy Visibility and Warning Indicators

Argweld PurgEye 200 Rechargeable Hand Held protective storage case

The PurgeAlarm™ Visual Alarm Indicator provides additional support for the Family range of PurgEye® Weld Purge Monitors:

• 360 degree visibility
• Red warning indicator
• Green ‘ok to weld’ indicator (optional) 
• 85dB Sounder (optional)
• IP66 Environmental Protection
• Wall mounting with optional bracket
• PurgeNet™ Smart Cable for connection of other PurgeNet™ accessories

 

 

Contact us - See our Worldwide Offices

Read More

Technical Data and Specification

Argweld Purgeye PurgeNet PurgeAlarm PurgeLog Weld Purge Monitors Oxygen Analysers Gas Instruments

Can be fitted with single red light (stop) or green (go) and red light combination.

PNA-02 PurgeAlarm™ Visual Alarm Indicator

Options (Factory Fitted)

PNA-02d-901 Green Indicator

A green indicator (go) can be fitted above the standard red indicator (pictured). The green indicator will illuminate only if the alarm is active and is reading a value lower than the alarm threshold set by the user.

PNA-02d-902 Sounder

A 85dB sounder (2900Hz) is available as an option to provide an audible alarm or instead of the additional red light.

PNA-02d-903 Bracket

Wall mounting bracket.

PNA-02d-904 Extension

One of more 75mm extension piece(s) can be inserted between the base and the red indicator to increase the height of the indicator and improve visibility.

Options (user settings)

Flashing/Solid

Each indicator light and the sounder module include a user settable mode switch to select blinking/pulse or constant operation.

 

 

Compare all Weld Purge Monitors® in the PurgEye® Family Range

Contact us - See our Worldwide Offices

Read More

Frequently Asked Questions

Argweld PurgEye 1000 Remote Weld Purge Monitor Oxygen Analyzer Welding Gas Analyser Handy Rechargeable Battery Operated

1.0 What is the PurgeNet™ Visual Alarm Indicator?
PurgeNet™ Visual Alarm Indicator is a traffic light style column to convey the alarm status of your PurgEye® Weld Purge Monitor®.

2.0 How is the PurgeNet™ Visual Alarm Indicator connected?
The PurgeNet™ Visual Alarm Indicator is connected to the Weld Purge Monitor® through the PurgeNet™ Smart Cable.

3.0 What combinations of PurgeNet™ Visual Alarm Indicator are available?
The PurgeNet™ Visual Alarm Indicator can be fitted with a single red light (stop) or green (go) and red light combination, which have a 360-degree visibility.

4.0 How does the PurgeNet™ Visual Alarm Indicator signal the Weld Purge Monitor® status?
The red indicator will be illuminated when the PurgeNet™ Visual Alarm Indicator is enabled and is reading a value greater than the alarm threshold set by the user.

The green ‘ok to weld’ indicator (optional) will illuminate when readings are lower than the alarm threshold set by the user.

5.0 Does the PurgeNet™ Visual Alarm Indicator have a sounder?
A 85dB Sounder (2900Hz) is available as an option to provide an audible alarm or instead of the additional red light.

 

Contact us - See our Worldwide Offices

Read More

Shipping Information, Weights and Dimensions

PurgEye PurgeLog PurgeAlarm PurgeNet Weld Purge Monitors Gas Analysers Oxygen Measuring Instruments

Customs Tariff

 

European Customs Tariff: 9026 1089
International Customs Tariff: 9026 80 6000
United States Customs Tariff:               9026 80 6000
Canada Customs Tariff: 9026 80 6000

 

 

Product Codes and Sizes

 

Shipping Dimensions To Follow Shortly - mm
Nett weight 1.0 kg
Volumetric weight with case        1.0 kg

 

 

Product Codes and Sizes

 

Shipping Dimensions To Follow Shortly - mm
Nett weight 0.2 kg
Volumetric weight with case        0.3 kg

 

The PurgEye® Auxiliaries for the Argweld® Family Range of PurgEye® Weld Purge Monitors® (10 ppm - excluding Nano) are held in stock and available for immediate delivery. 

PART Nº PRODUCT DESCRIPTION
DPS1000

PNA-01

PNA-02

PNA-021

PNA-022

ATMS002

PNA-05
PurgeNet Dew Point Purging Gas Moisture Sensor

PurgeNet
Weld Machine Interface (for PPM Readings to Welding Power Sources, such as Orbital Welder)

PurgeAlarmVisual Alarm Indicator, red light only

PurgeAlarmVisual Alarm Indicator, green light (fitted on top of red light)

Bracket for PurgeAlarm

PurgeLog™ Data Logging Software for Quality Control

PurgeNet™ Smart Cable with multi-plug options, charging, alarms, software


PurgeAlarm
™ (NOTE: for use with PurgeNet™)

Contact us - See our Worldwide Offices

Read More

Items available as 'Downloads'

 

Leaflets and general sales material are available to everyone visiting our website.  

Restricted access items are shown at the end of this Download section.

 

PurgeAlarm™ Visual Alarm Indicator A4 Leaflet

PurgeAlarm™ Visual Alarm Indicator Information Flyer

PurgeAlarm™ Visual Alarm Indicator Information FAQ

 

PurgeNet™ Dew Point Purging Gas Moisture Sensor™ A4 Leaflet

PurgeNet™ Dew Point Purging Gas Moisture Sensor™ Information Flyer

PurgeNet™ Dew Point Purging Gas Moisture Sensor™ FAQ

 

PurgeNet™ Smart Cable A4 Leaflet

PurgeNet™ Smart Cable Information Flyer

PurgeNet™ Smart Cable FAQ

 

PurgeLog™ Data Logging Software Information Flyer

PurgeLog™ Data Logging Software FAQ

 

PurgeNet™ Automatic Machine Interface A4 Leaflet

PurgeNet™ Automatic Machine Interface Information Flyer

PurgeNet™ Automatic Machine Interface Information FAQ

  

Argweld® PurgEye® Weld Purge Monitors® Filters

 

Return on Investment (ROI) Weld Purge Monitors and Weld Purging Systems

Understanding Atmosphere in PPM

Parts Per Million vs Percentage of Oxygen

How to convert Percent to PPM

Argweld® PurgEye® Weld Purge Monitors® Poster

Argweld® PurgEye® Weld Purge Monitors® Technical Tips Training Posters

Argweld® PurgEye® Weld Purge Monitors® Family Range Information Flyer

Technical Comparison Table of all Argweld® PurgEye® Weld Purge Monitors®

 

 

Special Note: The items below are restricted and only available in our Secure Login section. This is mainly for the protection of our Exclusive Distributor network.
Should you wish to receive an item mentioned below which is not active as a 'download' link on this page, please contact us or your nearest Distributor.

PurgeAlarm™ Visual Alarm Indicator User Instructions Technical Manual
PurgeAlarm™ Visual Alarm Indicator Technical Notes
PurgeAlarm™ Visual Alarm Indicator User List Customer Service
PurgeAlarm™ Visual Alarm Indicator Price List 

 

Contact us - See our Worldwide Offices

 

Read More

PurgeNet® Smart Cable

  • Product
  • Overview
  • Key Features
  • Specification
  • FAQ
  • Ordering
  • Downloads
  • Gallery

Smart Control for your Purging

Our revolutionary PurgeNetSmart Cable can connect together smart accessories for weld purging, including the PurgeAlarm™ Traffic Light System which gives a visual warning during welding in case of rising or falling oxygen levels or for charging / power for your Weld Purge Monitor.

PurgeNetSmart Cable can also be used in conjunction with PurgeLog™ software to transfer weld purge data to a PC for quality control purposes.

Argweld PurgEye Weld Purge Monitor HFT Smart Lead Cable Oxygen Analysers

 

Contact us - See our Worldwide Offices

Read More

Giving You Full Control of your Welding Accessories

Argweld PurgEye Weld Purge Monitor HFT Smart Lead Cable Oxygen Analysers

Our high spec Weld Purge Monitors® reading down to 1 ppm (accurate to 10 ppm) are shipped as standard with a PurgeNet™ Smart Cable, a lead connection and machine interface.

The range included are the PurgEye® 200, PurgEye® Desk, PurgEye® 600, PurgEye® 1000 and PurgEye® 1500 Site.

PurgeNet™ Smart Cable can control charging, quality control software and visual alarms.

Optional items:

  • PurgeAlarm™ Traffic Light Visual Alarm warning accessory.

  • PurgeNet™ also works with PurgeLog™ to easily transfer weld purge data for Quality Control purposes.

 

Contact us - See our Worldwide Offices

Read More

Smart Features for your Weld Purge Monitor® 

Argweld PurgEye Weld Purge Monitor HFT Smart Lead Cable Oxygen Analysers

PurgeNet™ Smart Cable give welders full control of their welding accessories like no other, allowing any of our 1 ppm (accurate to 10 ppm) Weld Purge Monitors®.

The PurgeNet™ Smart Lead allows accessories to be connected.

These include:

  • Charging and Power to your Weld Purge Monitor®

  • An external audible and visual warning devices

  • PurgeLog™ Data Logging Software Quality Control

PurgeNet™ Smart Lead with Machine Interface is simply connected to the Weld Purge Monitor®.  

Our 1 ppm (accurate to 10 ppm) Weld Purge Monitors the PurgEye® 200, PurgEye® Desk, PurgEye® 600, PurgEye® 1000 and PurgEye® 1500 Site all now shipped 'as standard' with PurgeNet™ Smart Cable.

 

Contact us - See our Worldwide Offices

Read More

Technical Data and Specification

PurgeNet PurgEye Smart Cable Weld Purge Monitors Oxygen Analysers Weld Purging

PurgeNet™ Smart Cable is designed to interface with the Argweld® Family Range of PurgEye® Weld Purge Monitors®.

  • Connect it to PurgeAlarm™ Visual Warning System in a traffic light system for easy use
  • Charge your Weld Purge Monitor®
  • Data Logging Transfer using PurgeLog™ for Quality Control.  

10 ppm range of PurgEye® Weld Purge Monitors® includes the following models:

  • PurgEye® 200
  • PurgEye® Desk
  • PurgEye® 600
  • PurgEye® 1000
  • PurgEye® Site

PurgeNet™ Smart Cable is now supplied 'as standard' with these multi-plug options.

(Note, the PurgEye Nano which measures to 10 ppm is NOT included due to simplicity of the Nano instrument.)

 

See the PurgeNet™ Smart Cable Connections on the diagram below:

PurgeNet Smart Cable for connecting to visual alarm for rising oxygen levels

 

Compare all Weld Purge Monitors

Contact us - See our Worldwide Offices

Read More

Frequently Asked Questions

Argweld PurgEye 1000 Remote Weld Purge Monitor Oxygen Analyzer Welding Gas Analyser Handy Rechargeable Battery Operated

1.0 Which Weld Purge Monitor® comes with PurgeNet™ Smart Cable?
Our high spec 1 ppm Weld Purge Monitors the PurgEye® 200, PurgEye® Desk, PurgEye® 600, PurgEye® 1000 and PurgEye® 1500 Site all now come equipped with PurgeNet™ Smart Cable. 

2.0 How does PurgeNet™ connect to the Weld Purge Monitor®?
The PurgeNet™ Smart Cable connects directly into the Weld Purge Monitor®.

3.0 How can PurgeNet™ help me?
PurgeNet™ can controls the welding power sources such as orbital welders and any other automatic welding systems to switch on and off according to oxygen levels. This will ensure you are notified of rising or falling oxygen levels to prevent weld oxidation (interface required).

4.0 What accessories can PurgeNet™ be connected to?
PurgeNet™ Smart Cable can be connected to the PurgeNet™ Visual Alarm Indicator, a traffic light style column to convey the alarm status of your PurgEye® Weld Purge Monitor®.

5.0 Does PurgeNet™ work with PurgeLog™?
Yes, PurgeNet™ can be used with PurgeLog™ Software to transfer weld purge data for quality control of welds.

 

Contact us - See our Worldwide Offices

Read More

Shipping Information, Weights and Dimensions

PurgeNet PurgEye Smart Cable Weld Purge Monitors Oxygen Analysers Weld Purging

Customs Tariff

 

European Customs Tariff: 9026 1089
International Customs Tariff: 9026 80 6000
United States Customs Tariff:               9026 80 6000
Canada Customs Tariff: 9026 80 6000

 

 

Product Codes and Sizes

 

Shipping Dimensions To Follow Shortly - mm
Nett weight 0.3kg
Volumetric weight with case        0.4 kg

 

 

The PurgEye® Auxiliaries for the Argweld® Family Range of PurgEye® Weld Purge Monitors® (10 ppm - excluding Nano) are held in stock and available for immediate delivery. 

PART Nº PRODUCT DESCRIPTION
DPS1000

PNA-01

PNA-02

PNA-021

PNA-022

ATMS002

PNA-05
PurgeNet Dew Point Purging Gas Moisture Sensor

PurgeNet
Weld Machine Interface (for PPM Readings to Welding Power Sources, such as Orbital Welder)

PurgeAlarmVisual Alarm Indicator, red light only

PurgeAlarmVisual Alarm Indicator, green light (fitted on top of red light)

Bracket for PurgeAlarm

PurgeLog™ Data Logging Software for Quality Control

PurgeNet™ Smart Cable with multi-plug options, charging, alarms, software


PurgeAlarm
™ (NOTE: for use with PurgeNet™)

Contact us - See our Worldwide Offices

Read More

Items available as 'Downloads'

 

Leaflets and general sales material are available to everyone visiting our website.  

Restricted access items are shown at the end of this Download section.

 

PurgeNet™ Smart Cable A4 Leaflet

PurgeNet™ Smart Cable Information Flyer

PurgeNet™ Smart Cable FAQ

 

PurgeNet™ Dew Point Purging Gas Moisture Sensor™ A4 Leaflet

PurgeNet™ Dew Point Purging Gas Moisture Sensor™ Information Flyer

PurgeNet™ Dew Point Purging Gas Moisture Sensor™ FAQ

 

PurgeAlarm™ Visual Alarm Indicator A4 Leaflet

PurgeAlarm™ Visual Alarm Indicator Information Flyer

PurgeAlarm™ Visual Alarm Indicator Information FAQ

 

PurgeLog™ Data Logging Software Information Flyer

PurgeLog™ Data Logging Software FAQ

 

PurgeNet™ Automatic Machine Interface A4 Leaflet

PurgeNet™ Automatic Machine Interface Information Flyer

PurgeNet™ Automatic Machine Interface Information FAQ

  

Argweld® PurgEye® Weld Purge Monitors® Filters

 

Return on Investment (ROI) Weld Purge Monitors and Weld Purging Systems

Understanding Atmosphere in PPM

Parts Per Million vs Percentage of Oxygen

How to convert Percent to PPM

Argweld® PurgEye® Weld Purge Monitors® Poster

Argweld® PurgEye® Weld Purge Monitors® Technical Tips Training Posters

Argweld® PurgEye® Weld Purge Monitors® Family Range Information Flyer

Technical Comparison Table of all Argweld® PurgEye® Weld Purge Monitors®

 

 

Special Note: The items below are restricted and only available in our Secure Login section. This is mainly for the protection of our Exclusive Distributor network.
Should you wish to receive an item mentioned below which is not active as a 'download' link on this page, please contact us or your nearest Distributor.

Argweld® PurgeNet® Smart Cable User Instructions Technical Manual
Argweld® PurgeNet® Smart Cable  Technical Notes
Argweld® PurgeNet® Smart Cable  Weld Purge Monitor® User List Customer Service
Argweld® PurgeNet® Smart Cable Weld Purge Monitor® Price List 

 

Contact us - See our Worldwide Offices

 

Read More

Más artículos...

  1. PurgeNet™ Cable Inteligente