Welding Cr/Mo/V Steel Pipe Joints


Huntingdon Fusion Techniques HFT® have developed HotPurge®, an Inflatable Tube and Pipe Purging System specifically designed for use where the temperatures may reach as high as 300ºC (572ºF). Chromium/molybdenum/vanadium steels need to be pre-heated prior to welding and also require a post-weld heat-treatment in order to preserve the mechanical properties. These materials can also suffer from loss of elements through oxidation, thus changing alloy balance and affecting mechanical properties. Protection can be provided through the use of specially developed weld purge systems.

Huntingdon Fusion Techniques HFT® have developed HotPurge®, an Inflatable Tube and Pipe Purging System specifically designed for use where the temperatures may reach as high as 300ºC (572ºF).

Ron Sewell, Chairman for HFT® said: “Restricting the volume to be purged is always crucial when welding tubes and pipes in order to reduce the volume to be purged. With CMV steels this is challenging as a pre- and post- weld heat treatment is necessary to prevent cracking. To prevent oxidation, the inside of piping needs to be purged continuously using a specialised pipe weld purging system as conventional purging systems will be unsuitable.”

Manufactured in sizes 6 to 88” (150 to 2,235 mm), HotPurge® Systems can be used repeatedly for weld purging and can keep the oxygen levels below 100 parts per million (ppm) throughout the welding cycle, ensuring oxidation-free welds and eliminating metallurgical imperfections caused by rapid heating and cooling.

Once positioned in the pipe and inflated with an inert gas supply, the HotPurge® System seals inside the pipe with the inert gas supply displacing the oxygen from within the weld purging zone ready for pre-heating and welding. Each HotPurge® System is manufactured with a Weld Purge Monitor® connection for viewing the oxygen level throughout the welding process.

Each HotPurge® System features PurgeGate®, a revolutionary device to prevent over-inflation of, and damage to the inflatable dams. The innovative HotPurge® System also incorporates RootGlo®, a central band containing photoluminescent materials for easy positioning inside the pipe and that is effective for up to 20 hours.

Huntingdon Fusion Techniques HFT® have a Worldwide Exclusive Distributor Network.

More information

Huntingdon Fusion Techniques HFT® have developed HotPurge®, an Inflatable Tube and Pipe Purging System specifically designed for use where the temperatures may reach as high as 300ºC (572ºF).   Huntingdon Fusion Techniques HFT® have developed HotPurge®, an Inflatable Tube and Pipe Purging System specifically designed for use where the temperatures may reach as high as 300ºC (572ºF).
   

 


 

This Press Release is Succesfully Published in Worldwide Magazines, by clicking the logo you can read the article: 

 Logo OilVoice  Read the published article directly on the website Fluid Handling Pro.  
 Logo OilVoice  Read the published article directly on the website ThomasNet.  
   
   

 


Huntingdon Fusion Techniques HFT® are proud members of:

American Welding Society International Tube Association The Welding Institue Welding World


You are not allowed to use or copy any of this material or content without the written permission of Huntingdon Fusion Techniques HFT®, copyright protected. All rights belong to Huntingdon Fusion Techniques HFT® exclusively. Not for any reproduction without consent.