Blogs - Page 26 - Huntingdon Fusion Techniques HFT®

Fit for Nuclear 2017/2018

We’ve recently achieved a place in the 2017/2018 Fit for Nuclear Programme (F4N) in conjunction with the Nuclear Advanced Manufacturing Research Centre. This means we are pre-qualified to do business with Tier 2 Contractors who are carrying out work at any of the UK Nuclear facilities (including of course Hinkley Point C). Georgia Gascoyne, Managing […]

Match Report: Burry Port Rugby Club Ease into Round 2

Burry Port Rugby Club, The Blacks were on WRU Bowl Duty on the weekend with a 1st Round encounter against Birchgrove RFC. With a sizable crowd behind the Home side, Burry Port Rugby Club got off to a great start and with referee Chris Williams laying the law down from the offset, particularly at the […]

Keeping Tube and Pipe Joints Clean when Welding

It is important when welding stainless steel and titanium tube and pipe joints to be able to have zero colour, oxide-free welds both on the inside and outside. To achieve the conditions for zero colour, or oxide-free weld joints, it is necessary to remove the air around the joint to a level where the oxygen […]

The Boys are back in Town at Burry Port RFC

The Welsh Rugby Union season is back and Huntingdon Fusion Techniques HFT® is proud to continue our long association with Burry Port RFC by continuing to be one of their major sponsors. The Blacks (Burry Port RFC) kicked off the season with a huge 85-5 point victory against Penygroes on 5th September and headed straight […]

Low Cost one-way Valve for specific flow rate and pressure

This low cost accessory has been designed and constructed to pass a maximum of 7.5 litres/min and 0.5 bar pressure. Other versions of 1bar and above are also available. Designated “PurgeGate®”, this nifty, hi-tech item has applications in both fluid and gas control. Its small size and low weight makes it valuable for small liquid […]

Remote Monitoring of Weld Purge up to 1 km away

When welding lengths of tube and pipework fabrications, as well as sections of pipelines of 20 metres length and more, one problem operators face is not receiving a fast and true weld purge reading from the purge zone. Now, for the first time, Huntingdon Fusion Techniques HFT® makes it possible to have an immediate reading […]

New Tungsten Electrode Grinder

Ensuring your Tungsten Electrode is sharpened correctly can help to improve weld quality. Tungsten Electrode Grinders are a convenient, safer and accurate way than other methods of grinding Tungsten Electrodes. Back by popular demand, Huntingdon Fusion Techniques HFT® have re-initiated the manufacturing of the TEG-2 Tungsten Electrode Grinder, which retired from their product range a […]

Introducing PurgeNet™ and Accessories

Monitoring the oxygen level before, during and after welding is essential. Welding in an environment of less then 100 ppm for stainless steel and less than 20 ppm for titanium ensures that welds are free from oxidation. Allowing joints to oxidise when welding then involves mechanical or chemical oxide removal to prevent to loss of […]

Weld Purging for Closing Welds

Weld Purging a variety of pipes of different diameters can prove complex and costly, particularly when having to fill whole pipework systems with expensive argon gas. One solution that welders have traditionally devised has been to construct homemade foam or paper dams that are placed either side of the weld, constricting the purge volume to […]

Low Cost Weld Purge Monitor®

Weld Purging is the act of removing oxygen from the vicinity of a weld before, during and after welding. The weld zone is usually confined, with the oxygen level being monitored to ensure it is reduced to a level where welds and their heat affected zones will not be affected by oxygen, leading to loss […]

Effective Pipe Plugging in Heavy-Duty Applications, with Aluminium Plugs

Effective plugging and sealing of pipes in heavy-duty applications is essential, especially in refineries, offshore operations, plumbing operations as well as domestic and industrial water activities where the plug is likely to be immersed in chemicals or exposed to high temperatures. The Pipestoppers® Division at Huntingdon Fusion Techniques HFT® manufacture a Range of heavy-duty Aluminium […]

Weld Purge Monitor Range Includes the PurgEye ® 100

Leading the way in Weld Purging Technology, the PurgEye® 100 Weld Purge Monitor has highly advanced its predecessor, the Mark V MKV Argweld® Monitor. With over 40 years in the Weld Purging Industry and with scientific knowledge and research, our development of the PurgEye® 100 Weld Purge Monitor has become the World’s Leading low cost, […]

« Previous 1 2 3 4 … 24 25 26 27 28 … 55 56 57 58 Next »