Various Inflatable Pipe Purging Systems are in use Worldwide for welding titanium, stainless steel and zirconium tubes and pipes. Often, these purging systems are inflated beyond their capacity and burst mid-weld, resulting in a lost weld and broken purging system.
To ensure the gas going through the pipe purging system is controlled, Huntingdon Fusion Techniques HFT® have designed and developed PurgeGate®, a unique valve which regulates the pressure and flow of gas that is passed through the system, ensuring the system will not burst regardless of the pressure and flow rate.
Ron Sewell, Chairman for HFT® said: “This low cost accessory has been designed and constructed to pass a maximum of 7.5 litres/min and 0.5 bar pressure. Other versions of 1bar and above are also available.”
“Designated “PurgeGate®”, this nifty, hi-tech item has applications in both fluid and gas control. Its small size and low weight makes it valuable for small liquid dispensing machines, as well as large ones with multiple heads, where higher pressures and flow rates might be used to cater for the output of a multi-head machine.”
PurgeGate® has found valuable applications in the Welding Industry, where inflatable devices are used for Weld Purging of tubes and pipes.
Setting flow rates and pressures on gas regulators can be interfered with by personnel distant to the welding process, who might move the controls or play with them, without realising the harm that can be done.
If inflatable devices are caused to burst during a tube or pipe weld sequence then the loss of protective gas can cause a highly expensive and extremely inconvenient weld repair.
PurgeGate® is fitted as standard on HFT®’s QuickPurge® and HotPurge® Tube, Pipe and Pipeline Weld Purging Systems and is an optional extra for their lower cost PurgElite® and PurgExtra® series. PurgeGate® is designed to fit on all brands of Pipe Purging Systems and the reusable valve can easily be moved from system to system.
 |
Huntingdon Fusion Techniques HFT® have a Worldwide Exclusive Distributor network.
This Press Release is Succesfully Published in Worldwide Magazines, by clicking the logo you can read the article:
 |
Read the published article directly in the magazine International Tube Association |
 |
Read the published article directly in the magazine TubeFirst |
 |
Read the published article directly in the magazine Wire and Tube News |
 |
Read the published article directly in the magazine The Fabricator |
 |
Read the published article directly in the magazine Canadian Fabricating and Welding |
 |
Read the published article directly in the magazine Tube News |
You are not allowed to use or copy any of this material or content without the written permission of Huntingdon Fusion Techniques HFT®, copyright protected. All rights belong to Huntingdon Fusion Techniques HFT® exclusively. Not for any reproduction without consent.
|
