Welders often face difficulties when working under the conditions experienced on-site. When welding critical joints in such situations, the challenges might come from working at height, exposure to extremes of heat and cold, harmful sand and dust and even hazardous fumes. Therefore using an expensive Weld Purge Monitor® in such conditions may not always be ideal.
With over 40 years of scientific research behind them, Weld Purging Experts Huntingdon Fusion Techniques HFT® have designed a virtually non-destructible Weld Purge Monitor® to work accurately within extreme environments. The PurgEye® Site is a guarded oxygen monitor in a secure, safe, waterproof and dustproof, very tough carry case.
Ron Sewell, Chairman for HFT® said: “This tough, robust monitor has been specifically designed for on-site conditions. With the housing case open the monitor is IP65 rated and IP68 rated with the lid closed. The PurgEye® Site measures oxygen levels very accurately from 1,000 ppm, right down to 10 ppm.
The PurgEye® Site has a fast response, long life sensor and it is equipped with PurgeNet™, allowing the monitor to connect to a variety of accessories. One of the accessories, an automatic welding machine interface, allows controls to be based upon the oxygen level, to prevent welding if that level is too high. Other accessories include a traffic light visual indication system and a temperature gauge.
The large, bright, OLED display allows the data to be easily read and is mainly symbol based, rather than text. The display does not need a backlight and can be viewed from greater angles than LED screens.
Oxygen levels can be indicated by the PurgEye® Site gas analyser in parts per million (ppm) or percentage, depending on user preference. Flow detection ensures accurate reading of gas samples, along with a blocked filter icon and power on / off with a standby button for sensor warm up.
The small, low volume, almost indestructible case, can be carried anywhere and the PurgEye® Site used either with its internal battery, which lasts up to 10 hours or connected to mains electricity from 90 – 250 v, single phase A.C.
By using the PurgEye® Site, welders can ensure non-oxidised, zero colour welds are achieved regardless of conditions. Using a Weld Purge Monitor® eliminates guesswork, prevents the need to clean or grind welds and adjacent surfaces and saves further considerable costs by preventing loss of argon.
 |
 |
Huntingdon Fusion Techniques HFT® have a Worldwide Exclusive Distributor network.
This Press Release is Succesfully Published in Worldwide Magazines, by clicking the logo you can read the article:
 |
Read the published article directly in the magazine ThomasNet |
|
|
Read the published article directly in the magazine MetaalMagazine |
You are not allowed to use or copy any of this material or content without the written permission of Huntingdon Fusion Techniques HFT®, copyright protected. All rights belong to Huntingdon Fusion Techniques HFT® exclusively. Not for any reproduction without consent.
|
