Made from high-grade nylon 6, which is resistant to saltwater corrosion and many chemicals.
HFT Pipestoppers® Nylon Plugs are versatile, lightweight, and mostly pocket-sized. They suit many applications and range from 0.5 to 6" (13 to 152 mm). These plugs are ideal for a number of other applications in the water and gas industries, as well as in all other areas where pipes are used or where holes need to be blocked, including even on nuclear submarines.
Testing and sealing of all pipes, pipe joints, and pipework assemblies can be done with the HFT Pipestoppers® Nylon Plugs. These plugs are used internationally as the standard drain test plugs for testing the leak tightness of foul water lines during installation.
Other applications include sealing holes in castings, tanks, and other assemblies for spraying and blasting to protect the insides, maintenance and installation of swimming pool and water spa pipework for use as 'Scupper Plugs' in ships, for telecommunication pipelines and pipework up to 6", as radiator test plugs for cars and commercial vehicles, as heat exchanger tube plugs, etc.
Along with natural rubber rings, the HFT Pipestoppers® Nylon Testing Plug provide a high-quality leak-tight seal in the selected orifice and is nuclear compatible, chemically clean, demountable, and will not seize up. The standard seals are made from natural rubber. However, other available options are:
Designed specifically for plumbing applications for the leak testing of pipes and sinks.
Product Code: PSPC001
Weight: 1.9 kg (4.18 lbs)
Case Size: 450 x 340 x 100 mm (17.17 x 13.38 x 3.93")
Kit Contents:
Designed specifically for plumbing applications for the leak testing of total waste fluid draining systems in drains domestic or commercial buildings.
Product Code: PSDK001
Weight: 2.65 kg (5.84 lbs)
Size: 450 x 340 x 100 mm (17.17 x 13.38 x 3.93")
Kit Contents:
Designed specifically for automotive applications for the leak testing of car radiators.
Product Code: PSAUC001
Weight: 1.9 kg (4.18 lbs)
Size: 450 x 340 x 100 mm (17.17 x 13.38 x 3.93")
Kit Contents:
Designed specifically for commercial vehicle applications for the leak testing of radiators and inter-coolers.
Product Code: PSCMC001
Weight: 2.65 kg (5.84 lbs)
Size: 450 x 340 x 100 mm (17.17 x 13.38 x 3.93")
Kit Contents:
Designed specifically for plumbing applications for the leak testing of pipework used in pool and spa maintenance.
Product Code: PSSPA001
Weight: 1.9 kg (4.18 lbs)
Size: 450 x 340 x 100 mm (17.17 x 13.38 x 3.93")
Kit Contents:
The PurgEye® 100 IP65 is supplied with:
"The purge meters are second to none."
"I am a huge fan of Huntingdon products and have talked to others over the years about using them. The purge meters are second to none. I own and use regularly my PurgEye 100 and my PurgEye 300. I think somewhere, I still have my original Argweld® MKV monitor, which sadly no longer powers up. I am a scarce breed because I have 3 degrees and a complete academic understanding of metallurgy, but more importantly, welding science; I also have over 20 years of hands-on experience in welding on drill floors, firing lines, and vessel shops. I quite literally have a passion for old-fashioned welding! Excellent product, guys!"
Davina Urquhart
CITY COLLEGE AND SENIOR WELDING ENGINEER AT TRANSWELD SERVICES LTD
"One of the best, if not the best, residual oxygen detector instruments on the market."
"I believe the PurgEye to be one of the best if not the best, residual oxygen detector instruments on the market with its digital residual oxygen level LED display readouts measuring as low as 0.01% and its large, user-friendly viewing screen making it easier for me to read. I also believe the PurgEye has great accuracy in residual oxygen, with speedy measurements displayed within seconds. The PurgEye is a far cry from the old school homemade 'use a cigarette lighter' to check purge gas flow system."
Construction and Maintenance
PIPING SOLUTIONS PTY LTD, AUSTRALIA
"Purge monitors are a necessity."
"I can personally vouch for purge monitors. When working with medium to large-diameter exotic pipework, they can prevent you from having a terrible day! I've only used the older model, which was a godsend. Anyone, from the welder who has had to carry out weld repairs due to root weld oxidation (or coking) on such materials, to the directors facing an expensive bill for re-work and possible tarnished company reputation, to the client with their project now running behind schedule - knows exactly what I mean. Purge monitors are a necessity."
Colin Sherriffs
WELDING AND FABRICATION INSTRUCTOR/ASSESSOR AT ITCA LTD
